The Best Anglers Never Stop Learning

The Best Anglers Never Stop Learning

Other

Douglas Salmon Camp Swinger

Insect Species Icon None
Difficulty Icon Medium - 5-7 Min
Water Category Icon Coldwater

Tying Video

Become a Member

Sign up for full access to the Learning Center
and all the FlyBrary Content.
Tying Recipe
  • Hook: Intruder shank 25mm, intruder hook size #6 stinger
  • Thread: UTC 140 denier
  • Tag: Angora goat dubbing hot pink, salmon fly hen neck black, strung marabou black
  • Body: Sparkle braid silver, angora goat dubbing hot pink, ostrich herl hot pink barred black
  • Flash: Flashabou pearl
  • Eyes: Bead chain eyes medium black
  • Head: Cross cut rabbit zonker hot pink
  • Articulation wire: Senyos thin intruder trailer hook wire
  • Hook: If you don’t have shanks, cut the bend off of a streamer hook and use that as a shank. Octopus hooks are a great substitute for intruder hooks.
  • Thread: Any medium diameter thread will work. Try not to go thinner than 8/0 or 70 denier, as it may break in a few spots. Anything thicker than 6/0 or 140 denier may bulk the fly too much.
  • Tag: For the dubbing, any long fibered dubbing will work. Arizona simi-seal is a great alterative. Strung rooster saddle can substitute salmon fly hen neck, and marabou is a common item that is easy to get.
  • Body: Sparkle braid is preferred for the body of this fly, but use any flat braid you can find. Long fibered dubbing like arizona simi-seal is a great alternative to angora goat dubbing. There are no substitutes for ostrich herl
  • Flash: Use any flash that you like!
  • Eyes: Bead chain eyes are nice since they are light weight. If you want some more weight use dumbbell eyes.
  • Head: Long fibered dubbing can make a great head that will have a little more bulk.
  • Articulation wire: Thick mono can work great in replacement for intruder wire.

Like most streamers feel free to get creative with the color combinations, especially if you’re using this for salmon, as bright and contrasting colors can work great. For a fuller body, consider wrapping some schlappen or rooster saddle around the sparkle braid, similar to a wooly bugger to give the fly a bit more volume.

This is a very simple and effective swing fly for salmon and steelhead. The lightweight set up of this fly allows it to be fished in shallower waters, or add a sink tip to get it down deep.

Fish this in a generic down and across swing style. Cast across the river at a 45 degree angle down stream and let the current take the fly from the far bank, back to your side. Cast a few times in the same general area, then move 3-4 steps downstream and repeat.

None

No hatch chart data available for this selection.

Become a Member

Sign up for full access to the Learning Center
and all the FlyBrary Content.